You should feel just a tiny bit of friction, but not too much. Take a piece of paper and slide it under the nozzle.Now you’ll be able to move the bed and nozzle back and forth Go back to the menu and disable stepper motors.Go to your 3D printer’s menu and home all the axes.Here’s a quick recap on how to level your print bed: This is the ideal fix, as it requires the least effort and if it works, super! Leveling the print bed can help prevent the nozzle digging in a little too deep or too little in parts of your print, causing elephant’s foot-like symptoms. Sometimes, the fixes for elephant’s foot are quite simple. How to fix elephant’s foot in 3D printing It may also be problematic when you try to print very large models, as the weight of the model can push on the first layers, making them stick out even more. Under normal circumstances, the bulge caused by elephant’s foot is not too bad, but it may cause an issue when you need very tight tolerances. This happens for a number of reasons, all of which can be fixed. It’s what happens when the first layer is a little bit bigger than the rest of the layers, often accompanied by a slight bulge towards the bottom. Elephant’s Foot is an unsightly 3D printing error that is quite common.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |